Midland Handling Equipment UK - Trakmaster 203 Overhead Conveyor

203

Chain
Fully bi-planer with a true pitch of 203mm single large dia bearings are fitted between the horizontal chain links together with pairs of bearings on the vertical links.
Side links material grade 50B
Rivets material EN8M
Cruciforms sintered iron and copper

Bearings
Races from EN1A case hardened fitted with hardened carbon steel balls – crowded race type.

Pendants
Either standard free swinging on a single pair of wheels (23kg capacity) or fixed 6mm triangular plate with two pairs of wheels (35kg capacity).

Track
Comprising a rectangular section 57mm wide x 41mm deep with a 3mm wall thickness and 19mm wide slot in the bottom face. Rolled in 6m long sections. The sections would be complete with joint plates for easy bolted assembly. Curves would be rolled and fabricated from standard track section and surface hardened after manufacture to give a long life.

Drive Unit
Caterpillar type with driving dogs fitted between a twin pair of chains driven by geared motor unit and chain drive incorporating a torque limiter for overload protection. An inverter variable speed (4:1 ratio) or thyrister (10:1 ratio) is available. Speed envelope within 0.152 – 18 metres/minute.

Tension Unit
A spring loaded tension device would be fitted to ensure correct chain tension and to compensate for variances within the system.

Inspection
This would be incorporated in a readily accessible position in the circuit for inspection and preventative maintenance.

Support Structure
The conveyor would be either floor supported using square hollow section forming a rigid structure and incorporating base plates, or roof supported utilising track hanger clamps connected to tubular suspensions. Please see specification for specific proposals.

Finish
Track finished in poppy red powder coat, steelwork finished mid blue paint, machined parts self colour.

back




	For specific or full range of literature, or a free consultancy visit by our technical engineers, contact: Technical Support Telephone: 0116 259 3175 technical@mhel.co.uk

Midland Handling Equipment. Stretton Road, Great Glen, Leicester LE8 9GN. UK.
Tel: 0116 259 3175 . Fax : 0116 259 2820 . enquiry@mhel.co.uk


	© MHEL 2004